CONTROLLERS FAQ

What is the default IP address, username, and password?
192.168.1.1 user = root password = root

Why can't I access the controller?
Make sure that the managing computer has an IP address that is in the same subnet as the AP. For example, the computer should have an address of 192.168.1.x/24 if the AP has the default settings.

Where can I download the latest firmware?
http://www.valuepointnet.com/support/downloads.html

How do I setup port forwarding?
Go to the Access Point Monitor tab under the Management Menu. Enter the IP address of the device, MAC address, and Management port. The management port will be port 80 on our access points if you want to connect to the web configuration page. The controller port will be the virtual port that you will point to when you are remotely managing the device. Start at 60001 if you are using multiple devices on port 80. Set the protocol, and the connection. Now to login to the AP enter the full WAN IP address of the controller with the port. For example, you would enter http://x.x.x.x:60001.

What RADIUS attributes are supported by the controller?
The Current RADIUS attributes supported are:

User-Name
NAS-IP-Address
NAS-Identifier
Acct-Session-ID
Calling-Station-ID
Called-Station-ID
NAS-Port-Type
Acct-Session-Time
Acct-Terminate-Cause
Acct-Output-Packets
Acct-Input-Packets
Acct-Output-Octets
Acct-Input-Octets
Framed-IP
Port-Limit (for per-user bandwidth control)

We send an "accounting on" when the Controller boots and an "accounting off" for a coming reboot. We do not currently send interim updates.

Controller 3000/3500 Hotel Brand Compliance