ACCESS POINTS FAQ

What is the default IP address, username, and password?
192.168.0.1 user = root password = root
On older firmware versions of the 700g (2.3.0 and earlier) , the default IP address is https://192.168.0.3 user = admin pass = public

Why can't I ping the AP?
Make sure that the managing computer has an IP address that is in the same subnet as the AP. For example, the computer should have an address of 192.168.0.x/24 if the AP has the default settings.

Where can I download the latest firmware?
http://www.valuepointnet.com/support/downloads.html

What are the best channels to use?
1, 6, & 11 are the best channels to use because they do not overlap.

Should all APs have the same SSID?
Yes, having all of the APs on the same SSID will allow users to roam and connect to the AP with the strongest signal.

What types of encryption are available?
64 bit WEP, 128 bit WEP, and WPA-PSK are available on all APs. WPA2 is available on the MultiAP series.

How do I setup WDS?
Both access points need to be set on the same channel. The MAC address of the first access point needs to be specified in the WDS table of the second access point and vice versa.

What are the ac power adapter specs for the APs?
SuperAP 500/530/550 - 5v 2a. SuperAP 510 - 12v 1a. MultiAP 700 5v, 2a.

How do I install the waterproof Ethernet coupler?
Click here for a diagram